DSHG-04-2B2-DL-T-D24
Electro-Hydraulic Valve model DSHG-04-2B2-DL-T-D24 - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | 04 Size (NG10), ISO 4401-05 |
| Max Working Pressure | 21 MPa |
| Max T-Port Pressure | 21 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V (D24), AC 220V (A220) |
| Solenoid Type | DSG-01 class pilot valve |
| Spool Functions | 2B2 — two-position single-solenoid series — drawing on request |
| Hydraulic Fluid | Mineral oil per ISO 6743/4 |
Centre Condition & Cross-Reference
| Yuken Spool Code | 2B2 |
| Equivalent Spool Function | Drawing on request |
| De-energised Flow Path | two-position single-solenoid series — drawing on request |
The model carries Yuken spool code 2B2, which belongs to the two-position single-solenoid family. That family has no row in the spool table published on this site, so no port-connection pattern is restated here; the drawing for this exact code is issued with the quotation. Mechanically the valve is the standard DSHG-04 body described above.
Cross Reference
Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).
| YXCHK Model | DSHG-04-2B2-DL-T-D24 |
| Replaces | Yuken DSHG-04 |
| Mounting Standard | 04 Size (NG10) |
| Voltage Options | DC 24V (D24), AC 220V (A220) |
Pilot & Spool Control
Model DSHG-04-2B2-DL-T-D24 is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 2B2 — rather than the whole series. The model carries Yuken spool code 2B2. the code belongs to the two-position single-solenoid family, which the published spool table does not cover. No pattern is copied across from the three-position 3C codes. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.
Mounting & Electrical
DSHG-04-2B2-DL-T-D24 mounts on the ISO 4401 size 04 (NG10) interface, bolt pattern unchanged. The D24 coil is the 24 V DC version: current draw stays steady through the whole stroke, so pilot force does not fall off as the spool travels. Pilot stage is a DSG-01 class valve; working pressure 21 MPa with a 21 MPa T-port limit and 300 L/min rated flow. Fluid is mineral oil to ISO 6743.
Quality & Reliability
Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.
Where It Fits
These valves drive the main directional logic on hydraulic presses, injection moulding machines and machine-tool hydraulic units, where a small pilot signal has to switch a large flow. The DSG-01 pilot stage keeps the electrical demand low while the main spool carries the full 21 MPa working pressure. Send the original Yuken code and our engineers confirm the cross-reference inside 24 hours, free of charge.
Typical Applications
- Large injection molding machines
- Die casting machines
- High-flow machine tool systems
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More DSHG-04 series models
Also in Yuken DSHG directional valves