Серия 4WE10 Направляющий клапан
Robust NG10 size directional valve designed for heavy-duty forged applications. Oil-immersed solenoids ensure low noise and extreme longevity. 100% compatible with Rexroth 4WE10 standards.
Технические характеристики
| Параметр | Значение |
|---|---|
| Условный проход | NG10 / ISO 4401-05 |
| Max Pressure | 31.5 MPa (4500 PSI) |
| Макс. расход | 120 L/min (32 GPM) |
| Solenoid Type | Oil-immersed Type (Wet) |
| Protection | IP65 Rated |
Ключевые преимущества
Серия 4WE10 — распределители с условным проходом NG10 (монтаж ISO 4401-05 / Cetop 5) для мощных промышленных гидросистем. Полная взаимозаменяемость с оригинальной серией Rexroth 4WE10 / 3WE10: корпус из высокопрочного чугуна, соленоиды мокрого типа, все варианты золотников и напряжений — установка на штатную плиту без переделки.
- Рабочее давление до 31,5 МПа (4500 PSI), расход до 120 л/мин (32 GPM)
- Исполнения золотников 30B, 40B, 50B и др.; напряжение DC 12/24V, AC 110/220V
- Разъёмы DIN 43650 / ISO 4400, ручное управление, уплотнения NBR (стандарт) / Viton (опция)
- 100% заводские испытания, сертификация Intertek, гарантия замены 1 год, расчётный срок службы 8 лет
Как подобрать аналог
Для подбора аналога пришлите полный код клапана — например, 4WE10E30B/CG24N9Z5L. Код расшифровывается так: 4WE10 — серия и типоразмер, E30B — схема золотника, CG24 — напряжение 24V DC (AW220 — 220V AC), N9 — ручное управление, Z5L — разъём DIN 43650. Этих данных достаточно для точного подбора без вскрытия системы.
Нет кода? Пришлите фото шильдика или параметры (схема, напряжение, размер плиты) — инженер подтвердит взаимозаменяемость в течение 24 часов. Заказ от 1 штуки, образец с протоколом испытаний; для кузнечно-прессового оборудования и тяжёлого машиностроения подберём оптимальное исполнение золотника и уплотнений.
Типичные применения
The 4WE10 series is engineered for high-frequency switching, heavy-duty reliability and long-term stability in demanding industrial hydraulic systems. It is widely used across manufacturing, processing and mobile machinery where consistent directional control performance and minimal downtime are critical.
- Heavy forging presses - high-flow directional control
- Plastic machinery - injection molding clamp systems
- Waste compactors - high-power reciprocating actuators
Совместимость и перекрёстные ссылки
Drop-in replacement for Bosch Rexroth 4WE10 / 3WE10 series. NG10 / Cetop 5 / ISO 4401-05 mounting, 100% interchangeable.
Mounting dimensions comply with NG10 / Cetop 5 / ISO 4401-05, following the same interface specification as the original manufacturer. Solenoid connector options, manual override positions and seal materials (NBR standard, Viton optional) match the original series, so spare-part interchange is straightforward.
For assistance selecting the exact equivalent model code for your existing valve, contact our engineering team via the inquiry form - we confirm 1:1 interchangeability before you order.
Качество и стандарты
YXCHK manufactures all 4WE10 valves in our Zhejiang factory (est. 1994) with 48 CNC machines and an annual output of 80,000+ sets. Each unit passes a 100% factory test covering electrical continuity, internal leakage and maximum working pressure, and is Intertek-certified for high-pressure reliability.
Mounting patterns follow the international ISO 4401 / DIN 24340 standard, dimensionally matching Bosch Rexroth and Yuken original series. Valves are backed by a 1-year replacement warranty and an 8-year design service life in standard industrial environments.
Часто задаваемые вопросы
Is the 4WE10 series 100% interchangeable with the original Rexroth 4WE10 series?
Yes. YXCHK 4WE10 valves use the identical mounting pattern (NG10 / Cetop 5 / ISO 4401-05), electrical interface and performance data as the original Rexroth 4WE10 series, so they drop into existing manifolds and systems without any modification, re-piping or redesign.
What is the maximum working pressure and flow of the 4WE10 series?
The 4WE10 series is rated at 31.5 MPa maximum working pressure with a maximum flow of 120 L/min. T-port back pressure is limited to 16 MPa.
Which coil voltages are available for 4WE10 valves?
DC 24V, AC 220V. Standard connectors are compatible with DIN 43650 / ISO 4400 plugs, and all coils are wet-type solenoid designs for extended service life.
What warranty and quality testing apply to 4WE10 valves?
Every valve is 100% factory tested (electrical continuity, internal leakage and max pressure) before shipment, Intertek-certified, and covered by a 1-year replacement warranty with 24/7 engineering support.