Home Full Catalog 4WE10R30B/CG24N9Z5L
4WE10R30B/CG24N9Z5L - Hydraulic Solenoid Valve by YXCHK
4WE10 Series

4WE10R30B/CG24N9Z5L

Hydraulic Solenoid Valve model 4WE10R30B/CG24N9Z5L - a Rexroth 4WE10 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 120 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 120 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG10 / Cetop 5 / ISO 4401-05
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate120 L/min
Coil / ActuationDC 24V, AC 220V
Solenoid TypeWet solenoid, low-noise, N9 manual override
Spool FunctionsR — proprietary spool, not listed in the public function table
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionR
De-energised Flow Pathproprietary spool, not listed in the public function table
Yuken EquivalentProprietary spool, no cross-brand equivalent

R is a proprietary spool. Its centre connection is set by our own drawing and is not published in the public function table, so no cross-brand code is claimed for it and none should be inferred from the letters around it in the ordering code. The drawing is issued with the quotation, and the valve sits on the standard 4WE10 body.

Cross Reference

Drop-in replacement for Bosch Rexroth 4WE10 / 3WE10 series. NG10 / Cetop 5 / ISO 4401-05 mounting, 100% interchangeable.

YXCHK Model4WE10R30B/CG24N9Z5L
ReplacesRexroth 4WE10
Mounting StandardNG10 / Cetop 5 / ISO 4401-05
Voltage OptionsDC 24V, AC 220V

Spool Function & Control

Model 4WE10R30B/CG24N9Z5L is an NG10 (Cetop 5, ISO 4401-05) wet-armature solenoid directional valve engineered as a direct replacement for the Bosch Rexroth 4WE10 / 3WE10 series on the ISO 4401-05 mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — R — rather than the whole series. its centre connection is set by our own drawing and is not published in the public function table. No code should be inferred for it from the neighbouring spool letters. The 10 mm bore with a hardened, precision-ground spool delivers stable high-flow switching with minimal pressure ripple, and wet solenoid construction keeps the coil in oil for heat dissipation and a design service life beyond reliables.

Mounting & Electrical

4WE10R30B/CG24N9Z5L bolts onto any ISO 4401-05 subplate or manifold without an adapter. The CG24 coil is the 24 V DC wet-armature solenoid: current draw stays steady through the whole stroke, so pull-in and holding force do not change as the spool travels, which keeps shift timing repeatable on a large 10 mm bore. Termination is a Z5L DIN 43650 plug with indicator light, IP65 against dust and oil mist, plus the N9 manual override for hand operation with the power off. Rated 31.5 MPa working pressure, 120 L/min flow and 16 MPa maximum T-port back pressure; fluid is mineral oil HL/HLP per DIN 51524.

Quality & Reliability

Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.

Where It Fits

Duty here is high-flow and continuous: forging press rams, clamp and ejector circuits on injection moulding machines, industrial compactors, deck winches. A 120 L/min rating through the 10 mm bore keeps pressure drop low when several actuators share one power unit, and the oil-immersed solenoid holds switching quiet through long shifts. Quote the existing model code and the cross-reference comes back within 24 hours, at no charge.

Typical Applications

  • Heavy forging presses - high-flow directional control
  • Plastic machinery - injection molding clamp systems
  • Waste compactors - high-power reciprocating actuators

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models