Home Full Catalog 4WE6C60/CG24N9Z5L
4WE6C60/CG24N9Z5L - Hydraulic Solenoid Valve by YXCHK
4WE6 Series

4WE6C60/CG24N9Z5L

Hydraulic Solenoid Valve model 4WE6C60/CG24N9Z5L - a Rexroth 4WE6 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 80 L/min max flow with DC 12/24V, AC 110/220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 80 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG6 / Cetop 3 / ISO 4401-03
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate80 L/min
Coil / ActuationDC 12/24V, AC 110/220V
Solenoid TypeWet solenoid, Z5L DIN connector, IP65
Spool FunctionsC — not published in our spool table — drawing on request
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionC
De-energised Flow Pathnot published in our spool table — drawing on request
Yuken Equivalentequivalent code on request

Spool code C is not covered by the published spool table on this site, so no port-connection pattern is restated here from a neighbouring code; the drawing for this exact code is sent with the quotation. Structurally the valve is the standard 4WE6 body - ISO 4401-03 (Cetop 3, NG6) mounting, 31.5 MPa working pressure, 80 L/min rated flow. This entry covers the single-letter C spool.

Cross Reference

Direct drop-in replacement for Bosch Rexroth 4WE6 / 3WE6 series (WE6 ... /CG24N9Z5L and AW220N9Z5L coil variants). Same ISO 4401-03 mounting, no manifold modification required.

YXCHK Model4WE6C60/CG24N9Z5L
ReplacesRexroth 4WE6
Mounting StandardNG6 / Cetop 3 / ISO 4401-03
Voltage OptionsDC 12/24V, AC 110/220V

Spool Function & Control

Model 4WE6C60/CG24N9Z5L is a wet-armature solenoid directional valve in the 4WE6 family, a direct drop-in for Bosch Rexroth WE6 / 3WE6 units on the ISO 4401-03 (Cetop 3, NG6) mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — C — rather than the whole series. the port-connection pattern for spool code C is not published in the spool table on this site. No pattern is copied across from a neighbouring code to fill the gap. Wet solenoid construction keeps the coil immersed in hydraulic oil for heat dissipation, smooth switching and a design service life beyond reliables.

Mounting & Electrical

4WE6C60/CG24N9Z5L mounts directly on any ISO 4401-03 subplate or manifold block without modification. The CG24 coil is the 24 V DC wet-armature solenoid: a DC coil draws a steady current that does not vary with spool stroke, so pull-in force and holding force stay the same whether the valve sits at rest or fully shifted. Termination is a Z5L DIN 43650 plug with integrated indicator light, rated IP65 against dust and oil mist, and an N9 manual override lets the spool be shifted by hand with the power off. Working fluid is mineral oil (HL/HLP) per DIN 51524; maximum T-port back pressure is 16 MPa.

Quality & Reliability

Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.

Where It Fits

This valve suits high-cycle industrial circuits such as hydraulic press ram control, CNC machine tool spindle and tool-changer switching, and automated production line actuator logic. Its 31.5 MPa rating covers the vast majority of stationary and mobile machinery, and the wet solenoid design delivers quiet, repeatable shifting in continuous duty. Send the original model code and our engineers confirm cross-reference compatibility within 24 hours, free of charge.

Typical Applications

  • Hydraulic press machines - pressure and direction control
  • Machine tooling - high-frequency spindle switching
  • Automation lines - precise actuator logic control

Equivalent & Cross-Brand

Comparing brands before ordering? The full Rexroth 4WE6 equivalent table maps every spool function (E, G, H, J, L, M, U, F) against the Rexroth, Yuken and Vickers codes it replaces. For the swap procedure itself, see the Rexroth 4WE6 replacement guide.

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models