4WE6EA60/CG24N9Z5L
Hydraulic Solenoid Valve model 4WE6EA60/CG24N9Z5L - a Rexroth 4WE6 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 80 L/min max flow with DC 12/24V, AC 110/220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG6 / Cetop 3 / ISO 4401-03 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 80 L/min |
| Coil / Actuation | DC 12/24V, AC 110/220V |
| Solenoid Type | Wet solenoid, Z5L DIN connector, IP65 |
| Spool Functions | EA — all ports blocked — single-solenoid spring-return version of spool E |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | EA |
| De-energised Flow Path | all ports blocked — single-solenoid spring-return version of spool E |
| Yuken Equivalent | 2B2B |
EA is the single-solenoid, spring-return version of spool E. The centre condition is unchanged: with the solenoid de-energised, P, A, B and T stay mutually isolated, exactly as on spool E. One solenoid shifts the spool and the spring brings it back, so losing power drops the valve to the blocking position rather than leaving it where it was.
Cross Reference
Direct drop-in replacement for Bosch Rexroth 4WE6 / 3WE6 series (WE6 ... /CG24N9Z5L and AW220N9Z5L coil variants). Same ISO 4401-03 mounting, no manifold modification required.
| YXCHK Model | 4WE6EA60/CG24N9Z5L |
| Replaces | Rexroth 4WE6 |
| Mounting Standard | NG6 / Cetop 3 / ISO 4401-03 |
| Voltage Options | DC 12/24V, AC 110/220V |
Spool Function & Control
Model 4WE6EA60/CG24N9Z5L is a wet-armature solenoid directional valve in the 4WE6 family, a direct drop-in for Bosch Rexroth WE6 / 3WE6 units on the ISO 4401-03 (Cetop 3, NG6) mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — EA — rather than the whole series. P, A, B and T stay mutually isolated, exactly as on spool E. One solenoid shifts the spool and the spring returns it, so power loss drops the valve to the blocking position. Wet solenoid construction keeps the coil immersed in hydraulic oil for heat dissipation, smooth switching and a design service life beyond reliables.
Mounting & Electrical
4WE6EA60/CG24N9Z5L mounts directly on any ISO 4401-03 subplate or manifold block without modification. The CG24 coil is the 24 V DC wet-armature solenoid: a DC coil draws a steady current that does not vary with spool stroke, so pull-in force and holding force stay the same whether the valve sits at rest or fully shifted. Termination is a Z5L DIN 43650 plug with integrated indicator light, rated IP65 against dust and oil mist, and an N9 manual override lets the spool be shifted by hand with the power off. Working fluid is mineral oil (HL/HLP) per DIN 51524; maximum T-port back pressure is 16 MPa.
Quality & Reliability
Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.
Where It Fits
The valve is built for repetitive industrial duty - press ram sequencing, spindle and tool-changer switching on CNC machines, actuator logic on automated lines. At 31.5 MPa it sits inside the pressure band used by most stationary and mobile hydraulic systems, and the wet armature keeps shifting quiet and repeatable under continuous cycling. Quote the existing model code and an engineer comes back with a cross-reference confirmation inside 24 hours, at no charge.
Typical Applications
- Hydraulic press machines - pressure and direction control
- Machine tooling - high-frequency spindle switching
- Automation lines - precise actuator logic control
Equivalent & Cross-Brand
Comparing brands before ordering? The full Rexroth 4WE6 equivalent table maps every spool function (E, G, H, J, L, M, U, F) against the Rexroth, Yuken and Vickers codes it replaces. For the swap procedure itself, see the Rexroth 4WE6 replacement guide.
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WE6 series models
Also in Rexroth-style directional valves