Home Full Catalog 4WE6H60/CG24N9Z5L
4WE6H60/CG24N9Z5L - Hydraulic Solenoid Valve by YXCHK
4WE6 Series

4WE6H60/CG24N9Z5L

Hydraulic Solenoid Valve model 4WE6H60/CG24N9Z5L - a Rexroth 4WE6 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 80 L/min max flow with DC 12/24V, AC 110/220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 80 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG6 / Cetop 3 / ISO 4401-03
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate80 L/min
Coil / ActuationDC 12/24V, AC 110/220V
Solenoid TypeWet solenoid, Z5L DIN connector, IP65
Spool FunctionsH — P, A, B and T all interconnected
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionH
De-energised Flow PathP, A, B and T all interconnected
Yuken Equivalent3C3

All four ports are interconnected at centre: P, A, B and T equalise. The pump discharges to tank and both work lines are vented to the same low pressure, so the actuator is free to float or to be pushed by an external load. This is the open centre, used where the circuit must unload the pump and release both lines at once.

Cross Reference

Direct drop-in replacement for Bosch Rexroth 4WE6 / 3WE6 series (WE6 ... /CG24N9Z5L and AW220N9Z5L coil variants). Same ISO 4401-03 mounting, no manifold modification required.

YXCHK Model4WE6H60/CG24N9Z5L
ReplacesRexroth 4WE6
Mounting StandardNG6 / Cetop 3 / ISO 4401-03
Voltage OptionsDC 12/24V, AC 110/220V

Spool Function & Control

Model 4WE6H60/CG24N9Z5L is a wet-armature solenoid directional valve in the 4WE6 family, a direct drop-in for Bosch Rexroth WE6 / 3WE6 units on the ISO 4401-03 (Cetop 3, NG6) mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — H — rather than the whole series. P, A, B and T are all interconnected. The pump discharges to tank and both work lines are vented to the same low pressure. Wet solenoid construction keeps the coil immersed in hydraulic oil for heat dissipation, smooth switching and a design service life beyond reliables.

Mounting & Electrical

4WE6H60/CG24N9Z5L mounts directly on any ISO 4401-03 subplate or manifold block without modification. The CG24 coil is the 24 V DC wet-armature solenoid: a DC coil draws a steady current that does not vary with spool stroke, so pull-in force and holding force stay the same whether the valve sits at rest or fully shifted. Termination is a Z5L DIN 43650 plug with integrated indicator light, rated IP65 against dust and oil mist, and an N9 manual override lets the spool be shifted by hand with the power off. Working fluid is mineral oil (HL/HLP) per DIN 51524; maximum T-port back pressure is 16 MPa.

Quality & Reliability

Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.

Where It Fits

Typical duty is high-cycle machine control: ram direction and pressure on hydraulic presses, spindle and tool-changer switching on CNC centres, actuator sequencing on automated lines. The 31.5 MPa rating puts it inside the range most stationary and mobile machinery runs at, while the oil-immersed solenoid keeps operation quiet and repeatable through continuous cycling. Send the model code you are replacing and the cross-reference is confirmed within 24 hours, free of charge.

Typical Applications

  • Hydraulic press machines - pressure and direction control
  • Machine tooling - high-frequency spindle switching
  • Automation lines - precise actuator logic control

Equivalent & Cross-Brand

Comparing brands before ordering? The full Rexroth 4WE6 equivalent table maps every spool function (E, G, H, J, L, M, U, F) against the Rexroth, Yuken and Vickers codes it replaces. For the swap procedure itself, see the Rexroth 4WE6 replacement guide.

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models