4WE6U60/AW220N9Z5L
Hydraulic Solenoid Valve model 4WE6U60/AW220N9Z5L - a Rexroth 4WE6 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 80 L/min max flow with DC 12/24V, AC 110/220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG6 / Cetop 3 / ISO 4401-03 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 80 L/min |
| Coil / Actuation | DC 12/24V, AC 110/220V |
| Solenoid Type | Wet solenoid, Z5L DIN connector, IP65 |
| Spool Functions | U — B → T open, A and P blocked |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | U |
| De-energised Flow Path | B → T open, A and P blocked |
| Yuken Equivalent | 3C10 |
B is connected to T while A and P are blocked. The B work line is vented to tank, the A line is sealed and the pressure port is isolated, so only one side of the actuator is released at centre and the pump is kept off the circuit.
Cross Reference
Direct drop-in replacement for Bosch Rexroth 4WE6 / 3WE6 series (WE6 ... /CG24N9Z5L and AW220N9Z5L coil variants). Same ISO 4401-03 mounting, no manifold modification required.
| YXCHK Model | 4WE6U60/AW220N9Z5L |
| Replaces | Rexroth 4WE6 |
| Mounting Standard | NG6 / Cetop 3 / ISO 4401-03 |
| Voltage Options | DC 12/24V, AC 110/220V |
Spool Function & Control
Model 4WE6U60/AW220N9Z5L is a wet-armature solenoid directional valve in the 4WE6 family, a direct drop-in for Bosch Rexroth WE6 / 3WE6 units on the ISO 4401-03 (Cetop 3, NG6) mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — U — rather than the whole series. B is connected to T while A and P are blocked. The B work line is vented, the A line is sealed and the pressure port is isolated. Wet solenoid construction keeps the coil immersed in hydraulic oil for heat dissipation, smooth switching and a design service life beyond reliables.
Mounting & Electrical
4WE6U60/AW220N9Z5L mounts on the same ISO 4401-03 subplate or manifold block, hole pattern unchanged. The AW220 coil is the 220 V AC wet-armature solenoid: an AC coil pulls in on a high inrush current and then holds on a much lower one once the armature is seated, so the seating stroke has to stay unobstructed for the valve to stay shifted. The coil ends in a Z5L DIN 43650 plug with indicator light, IP65 against dust and oil mist, and the N9 manual override allows hand operation during commissioning or fault-finding. Working fluid is mineral oil (HL/HLP) per DIN 51524, with 16 MPa maximum T-port back pressure.
Quality & Reliability
Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.
Where It Fits
The valve is built for repetitive industrial duty - press ram sequencing, spindle and tool-changer switching on CNC machines, actuator logic on automated lines. At 31.5 MPa it sits inside the pressure band used by most stationary and mobile hydraulic systems, and the wet armature keeps shifting quiet and repeatable under continuous cycling. Quote the existing model code and an engineer comes back with a cross-reference confirmation inside 24 hours, at no charge.
Typical Applications
- Hydraulic press machines - pressure and direction control
- Machine tooling - high-frequency spindle switching
- Automation lines - precise actuator logic control
Equivalent & Cross-Brand
Comparing brands before ordering? The full Rexroth 4WE6 equivalent table maps every spool function (E, G, H, J, L, M, U, F) against the Rexroth, Yuken and Vickers codes it replaces. For the swap procedure itself, see the Rexroth 4WE6 replacement guide.
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WE6 series models
Also in Rexroth-style directional valves