DSHG-04-3C10-T
Electro-Hydraulic Valve model DSHG-04-3C10-T - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | 04 Size (NG10), ISO 4401-05 |
| Max Working Pressure | 21 MPa |
| Max T-Port Pressure | 21 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V (D24), AC 220V (A220) |
| Solenoid Type | DSG-01 class pilot valve |
| Spool Functions | 3C10 — B → T open, A and P blocked |
| Hydraulic Fluid | Mineral oil per ISO 6743/4 |
Centre Condition & Cross-Reference
| Yuken Spool Code | 3C10 |
| Equivalent Spool Function | U |
| De-energised Flow Path | B → T open, A and P blocked |
B is connected to T while A and P are blocked. The B work line is vented to tank, the A line is sealed and the pressure port is isolated, so only one side of the actuator is released at centre and the pump is kept off the circuit.
Cross Reference
Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).
| YXCHK Model | DSHG-04-3C10-T |
| Replaces | Yuken DSHG-04 |
| Mounting Standard | 04 Size (NG10) |
| Voltage Options | DC 24V (D24), AC 220V (A220) |
Pilot & Spool Control
Model DSHG-04-3C10-T is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C10 — rather than the whole series. Yuken uses 3C10 for spool function U, so the centre condition is fixed. B is connected to T while A and P are blocked. The B work line is vented, the A line is sealed and the pressure port is isolated. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.
Mounting & Electrical
DSHG-04-3C10-T bolts to the ISO 4401 size 04 (NG10) interface with the same port layout as the original valve, so no manifold rework is needed. Both coil options are catalogued for this body - D24 for 24 V DC and A220 for 220 V AC - and the pilot stage is a DSG-01 class valve. Working pressure is 21 MPa with the same 21 MPa limit on the T port, rated flow 300 L/min, and the fluid is mineral oil to ISO 6743.
Quality & Reliability
Quality control at the Taizhou factory is 100% end-of-line: electrical operation, internal leakage and a 31.5 MPa pressure test, with the record archived per batch for traceability. The valve body is cast iron, CNC-machined to ISO 4401 mounting-face tolerances. Every model is Intertek certified and covered by a one-year replacement warranty against an eight-year design life, and orders of one piece or more are dispatched from Ningbo Port within seven working days.
Where It Fits
The valve sits in the main flow path of heavy machinery - press rams, mould clamps, machine-tool actuator logic - where flow is measured in hundreds of litres per minute and the spool has to shift on a low-power signal. Working pressure is 21 MPa with the same limit on the T port. The cross-reference is confirmed within 24 hours from the original model code, at no charge.
Typical Applications
- Large injection molding machines
- Die casting machines
- High-flow machine tool systems
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More DSHG-04 series models
Also in Yuken DSHG directional valves