Home Full Catalog DSHG-04-3C2-DL-T-A220
DSHG-04-3C2-DL-T-A220 - Electro-Hydraulic Valve by YXCHK
DSHG-04 Series

DSHG-04-3C2-DL-T-A220

Electro-Hydraulic Valve model DSHG-04-3C2-DL-T-A220 - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.

Max Pressure 21 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal Size04 Size (NG10), ISO 4401-05
Max Working Pressure21 MPa
Max T-Port Pressure21 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V (D24), AC 220V (A220)
Solenoid TypeDSG-01 class pilot valve
Spool Functions3C2 — all ports blocked (P, A, B and T mutually isolated)
Hydraulic FluidMineral oil per ISO 6743/4

Centre Condition & Cross-Reference

Yuken Spool Code3C2
Equivalent Spool FunctionE
De-energised Flow Pathall ports blocked (P, A, B and T mutually isolated)

With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain, so a cylinder or motor connected to A and B stays locked while the pressure line is sealed inside the valve. This is the blocking centre: the load is held after the pump stops and nothing drifts while the valve sits centred.

Cross Reference

Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).

YXCHK ModelDSHG-04-3C2-DL-T-A220
ReplacesYuken DSHG-04
Mounting Standard04 Size (NG10)
Voltage OptionsDC 24V (D24), AC 220V (A220)

Pilot & Spool Control

Model DSHG-04-3C2-DL-T-A220 is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C2 — rather than the whole series. Yuken uses 3C2 for spool function E, so the centre condition is fixed. With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain back to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.

Mounting & Electrical

DSHG-04-3C2-DL-T-A220 fits the same ISO 4401 size 04 (NG10) interface. The A220 coil is the 220 V AC version: it pulls in on a high inrush current and then holds on a much lower one once the pilot armature seats, so that seating stroke must stay unobstructed. Pilot stage is a DSG-01 class valve; 21 MPa working pressure, 21 MPa T-port limit, 300 L/min rated flow, mineral oil to ISO 6743.

Quality & Reliability

Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.

Where It Fits

The valve sits in the main flow path of heavy machinery - press rams, mould clamps, machine-tool actuator logic - where flow is measured in hundreds of litres per minute and the spool has to shift on a low-power signal. Working pressure is 21 MPa with the same limit on the T port. The cross-reference is confirmed within 24 hours from the original model code, at no charge.

Typical Applications

  • Large injection molding machines
  • Die casting machines
  • High-flow machine tool systems

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models