DSHG-04-3C2-DL-T-D24
Electro-Hydraulic Valve model DSHG-04-3C2-DL-T-D24 - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | 04 Size (NG10), ISO 4401-05 |
| Max Working Pressure | 21 MPa |
| Max T-Port Pressure | 21 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V (D24), AC 220V (A220) |
| Solenoid Type | DSG-01 class pilot valve |
| Spool Functions | 3C2 — all ports blocked (P, A, B and T mutually isolated) |
| Hydraulic Fluid | Mineral oil per ISO 6743/4 |
Centre Condition & Cross-Reference
| Yuken Spool Code | 3C2 |
| Equivalent Spool Function | E |
| De-energised Flow Path | all ports blocked (P, A, B and T mutually isolated) |
With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain, so a cylinder or motor connected to A and B stays locked while the pressure line is sealed inside the valve. This is the blocking centre: the load is held after the pump stops and nothing drifts while the valve sits centred.
Cross Reference
Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).
| YXCHK Model | DSHG-04-3C2-DL-T-D24 |
| Replaces | Yuken DSHG-04 |
| Mounting Standard | 04 Size (NG10) |
| Voltage Options | DC 24V (D24), AC 220V (A220) |
Pilot & Spool Control
Model DSHG-04-3C2-DL-T-D24 is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C2 — rather than the whole series. Yuken uses 3C2 for spool function E, so the centre condition is fixed. With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain back to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.
Mounting & Electrical
DSHG-04-3C2-DL-T-D24 mounts on the ISO 4401 size 04 (NG10) interface, bolt pattern unchanged. The D24 coil is the 24 V DC version: current draw stays steady through the whole stroke, so pilot force does not fall off as the spool travels. Pilot stage is a DSG-01 class valve; working pressure 21 MPa with a 21 MPa T-port limit and 300 L/min rated flow. Fluid is mineral oil to ISO 6743.
Quality & Reliability
Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.
Where It Fits
These valves drive the main directional logic on hydraulic presses, injection moulding machines and machine-tool hydraulic units, where a small pilot signal has to switch a large flow. The DSG-01 pilot stage keeps the electrical demand low while the main spool carries the full 21 MPa working pressure. Send the original Yuken code and our engineers confirm the cross-reference inside 24 hours, free of charge.
Typical Applications
- Large injection molding machines
- Die casting machines
- High-flow machine tool systems
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More DSHG-04 series models
Also in Yuken DSHG directional valves