Home Full Catalog DSHG-04-3C2-T
DSHG-04-3C2-T - Electro-Hydraulic Valve by YXCHK
DSHG-04 Series

DSHG-04-3C2-T

Electro-Hydraulic Valve model DSHG-04-3C2-T - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.

Max Pressure 21 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal Size04 Size (NG10), ISO 4401-05
Max Working Pressure21 MPa
Max T-Port Pressure21 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V (D24), AC 220V (A220)
Solenoid TypeDSG-01 class pilot valve
Spool Functions3C2 — all ports blocked (P, A, B and T mutually isolated)
Hydraulic FluidMineral oil per ISO 6743/4

Centre Condition & Cross-Reference

Yuken Spool Code3C2
Equivalent Spool FunctionE
De-energised Flow Pathall ports blocked (P, A, B and T mutually isolated)

With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain, so a cylinder or motor connected to A and B stays locked while the pressure line is sealed inside the valve. This is the blocking centre: the load is held after the pump stops and nothing drifts while the valve sits centred.

Cross Reference

Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).

YXCHK ModelDSHG-04-3C2-T
ReplacesYuken DSHG-04
Mounting Standard04 Size (NG10)
Voltage OptionsDC 24V (D24), AC 220V (A220)

Pilot & Spool Control

Model DSHG-04-3C2-T is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C2 — rather than the whole series. Yuken uses 3C2 for spool function E, so the centre condition is fixed. With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain back to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.

Mounting & Electrical

DSHG-04-3C2-T bolts to the ISO 4401 size 04 (NG10) interface with the same port layout as the original valve, so no manifold rework is needed. Both coil options are catalogued for this body - D24 for 24 V DC and A220 for 220 V AC - and the pilot stage is a DSG-01 class valve. Working pressure is 21 MPa with the same 21 MPa limit on the T port, rated flow 300 L/min, and the fluid is mineral oil to ISO 6743.

Quality & Reliability

Quality control at the Taizhou factory is 100% end-of-line: electrical operation, internal leakage and a 31.5 MPa pressure test, with the record archived per batch for traceability. The valve body is cast iron, CNC-machined to ISO 4401 mounting-face tolerances. Every model is Intertek certified and covered by a one-year replacement warranty against an eight-year design life, and orders of one piece or more are dispatched from Ningbo Port within seven working days.

Where It Fits

Typical duty is press and moulding machinery: ram direction on hydraulic presses, clamp and ejector circuits on injection moulding machines, tool-changer and spindle hydraulics on machining centres. A pilot-operated layout means the solenoid never has to move the main spool directly, so response stays repeatable at full pressure. Quote the existing code and the cross-reference comes back within 24 hours.

Typical Applications

  • Large injection molding machines
  • Die casting machines
  • High-flow machine tool systems

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models