DSHG-04-3C4-T
Electro-Hydraulic Valve model DSHG-04-3C4-T - a Yuken DSHG-04 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 300 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | 04 Size (NG10), ISO 4401-05 |
| Max Working Pressure | 21 MPa |
| Max T-Port Pressure | 21 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V (D24), AC 220V (A220) |
| Solenoid Type | DSG-01 class pilot valve |
| Spool Functions | 3C4 — P blocked, A and B open to T |
| Hydraulic Fluid | Mineral oil per ISO 6743/4 |
Centre Condition & Cross-Reference
| Yuken Spool Code | 3C4 |
| Equivalent Spool Function | J |
| De-energised Flow Path | P blocked, A and B open to T |
P is blocked while A and B are both connected to T. The pump is isolated from the circuit and both work lines drain to tank, so the actuator is driven in neither direction and a suspended load can settle. This is the float centre: pressure line sealed, both work ports vented.
Cross Reference
Direct replacement for Yuken DSHG-04 series electro-hydraulic valves. Function codes follow the Yuken dictionary (3C2, 3C60 etc.).
| YXCHK Model | DSHG-04-3C4-T |
| Replaces | Yuken DSHG-04 |
| Mounting Standard | 04 Size (NG10) |
| Voltage Options | DC 24V (D24), AC 220V (A220) |
Pilot & Spool Control
Model DSHG-04-3C4-T is a pilot-operated, solenoid-controlled directional valve of the DSHG-04 series, size 04 with a nominal bore of NG10, built to interchange with the Yuken DSHG-04 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C4 — rather than the whole series. Yuken uses 3C4 for spool function J, so the centre condition is fixed. P is blocked while A and B are both open to T. The pump is isolated from the circuit and both work lines drain to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 300 L/min at 21 MPa.
Mounting & Electrical
DSHG-04-3C4-T bolts to the ISO 4401 size 04 (NG10) interface with the same port layout as the original valve, so no manifold rework is needed. Both coil options are catalogued for this body - D24 for 24 V DC and A220 for 220 V AC - and the pilot stage is a DSG-01 class valve. Working pressure is 21 MPa with the same 21 MPa limit on the T port, rated flow 300 L/min, and the fluid is mineral oil to ISO 6743.
Quality & Reliability
Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.
Where It Fits
These valves drive the main directional logic on hydraulic presses, injection moulding machines and machine-tool hydraulic units, where a small pilot signal has to switch a large flow. The DSG-01 pilot stage keeps the electrical demand low while the main spool carries the full 21 MPa working pressure. Send the original Yuken code and our engineers confirm the cross-reference inside 24 hours, free of charge.
Typical Applications
- Large injection molding machines
- Die casting machines
- High-flow machine tool systems
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More DSHG-04 series models
Also in Yuken DSHG directional valves