Home Full Catalog DSHG-06-2B2-DL-T-A220
DSHG-06-2B2-DL-T-A220 - Electro-Hydraulic Valve by YXCHK
DSHG-06 Series

DSHG-06-2B2-DL-T-A220

Electro-Hydraulic Valve model DSHG-06-2B2-DL-T-A220 - a Yuken DSHG-06 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 650 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.

Max Pressure 21 MPa
Max Flow 650 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal Size06 Size (NG20)
Max Working Pressure21 MPa
Max T-Port Pressure21 MPa
Max Flow Rate650 L/min
Coil / ActuationDC 24V (D24), AC 220V (A220)
Solenoid TypeDSG-01 class pilot valve
Spool Functions2B2 — two-position single-solenoid series — drawing on request
Hydraulic FluidMineral oil per ISO 6743/4

Centre Condition & Cross-Reference

Yuken Spool Code2B2
Equivalent Spool FunctionDrawing on request
De-energised Flow Pathtwo-position single-solenoid series — drawing on request

Spool code 2B2 is a two-position single-solenoid function. Because it is not part of the published spool table, we do not copy a pattern across from the three-position 3C codes to fill the gap - ask for the drawing and it travels with the quotation. The hardware underneath is the ordinary DSHG-06 body.

Cross Reference

Direct replacement for Yuken DSHG-06 series. 3C60 function corresponds to Rexroth G function (P-T connected).

YXCHK ModelDSHG-06-2B2-DL-T-A220
ReplacesYuken DSHG-06
Mounting Standard06 Size (NG20)
Voltage OptionsDC 24V (D24), AC 220V (A220)

Pilot & Spool Control

Model DSHG-06-2B2-DL-T-A220 is a pilot-operated, solenoid-controlled directional valve of the DSHG-06 series, size 06 with a nominal bore of NG20, built to interchange with the Yuken DSHG-06 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 2B2 — rather than the whole series. The model carries Yuken spool code 2B2. the code belongs to the two-position single-solenoid family, which the published spool table does not cover. No pattern is copied across from the three-position 3C codes. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 650 L/min at 21 MPa.

Mounting & Electrical

DSHG-06-2B2-DL-T-A220 fits the same ISO 4401 size 06 (NG20) interface. The A220 coil is the 220 V AC version: high inrush on pull-in, much lower holding current once the pilot armature seats, so the seating stroke has to stay clear. Pilot stage is a DSG-01 class valve; 21 MPa working pressure, 21 MPa T-port limit, 650 L/min rated flow, mineral oil to ISO 6743.

Quality & Reliability

Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.

Where It Fits

Service is continuous industrial cycling: press sequencing, moulding clamp and ejector drives, machining centre hydraulics. Because the first stage is a DSG-01 class pilot valve, the solenoid stays small while the main stage handles the flow, and the body keeps its rating across the range. Give us the code you are replacing and the cross-reference is confirmed inside 24 hours.

Typical Applications

  • Cane sugar mills - large flow source switching
  • Ship cranes - heavy lifting control
  • Pulp & paper - heavy-duty hydraulic cylinders

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models