4WE6HA60/AW220N9Z5L
Hydraulic Solenoid Valve model 4WE6HA60/AW220N9Z5L - a Rexroth 4WE6 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 80 L/min max flow with DC 12/24V, AC 110/220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG6 / Cetop 3 / ISO 4401-03 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 80 L/min |
| Coil / Actuation | DC 12/24V, AC 110/220V |
| Solenoid Type | Wet solenoid, Z5L DIN connector, IP65 |
| Spool Functions | HA — P, A, B and T all interconnected |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | HA |
| De-energised Flow Path | P, A, B and T all interconnected |
| Yuken Equivalent | equivalent code on request |
HA is the single-solenoid conversion of spool H on the same spool. At centre all four ports are interconnected - P, A, B and T equalise - so the pump discharges to tank and both work lines are vented to the same low pressure, leaving the actuator free to float. The spring returns the spool to this open centre whenever the coil is de-energised, and because there is a single coil the valve cannot stay shifted after the supply is cut.
Cross Reference
Direct drop-in replacement for Bosch Rexroth 4WE6 / 3WE6 series (WE6 ... /CG24N9Z5L and AW220N9Z5L coil variants). Same ISO 4401-03 mounting, no manifold modification required.
| YXCHK Model | 4WE6HA60/AW220N9Z5L |
| Replaces | Rexroth 4WE6 |
| Mounting Standard | NG6 / Cetop 3 / ISO 4401-03 |
| Voltage Options | DC 12/24V, AC 110/220V |
Spool Function & Control
Model 4WE6HA60/AW220N9Z5L is a wet-armature solenoid directional valve in the 4WE6 family, a direct drop-in for Bosch Rexroth WE6 / 3WE6 units on the ISO 4401-03 (Cetop 3, NG6) mounting surface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — HA — rather than the whole series. P, A, B and T are all interconnected, the same centre as spool H. The pump discharges to tank and both work lines are vented to the same low pressure. Wet solenoid construction keeps the coil immersed in hydraulic oil for heat dissipation, smooth switching and a design service life beyond reliables.
Mounting & Electrical
4WE6HA60/AW220N9Z5L mounts on the same ISO 4401-03 subplate or manifold block, hole pattern unchanged. The AW220 coil is the 220 V AC wet-armature solenoid: an AC coil pulls in on a high inrush current and then holds on a much lower one once the armature is seated, so the seating stroke has to stay unobstructed for the valve to stay shifted. The coil ends in a Z5L DIN 43650 plug with indicator light, IP65 against dust and oil mist, and the N9 manual override allows hand operation during commissioning or fault-finding. Working fluid is mineral oil (HL/HLP) per DIN 51524, with 16 MPa maximum T-port back pressure.
Quality & Reliability
Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.
Where It Fits
This valve suits high-cycle industrial circuits such as hydraulic press ram control, CNC machine tool spindle and tool-changer switching, and automated production line actuator logic. Its 31.5 MPa rating covers the vast majority of stationary and mobile machinery, and the wet solenoid design delivers quiet, repeatable shifting in continuous duty. Send the original model code and our engineers confirm cross-reference compatibility within 24 hours, free of charge.
Typical Applications
- Hydraulic press machines - pressure and direction control
- Machine tooling - high-frequency spindle switching
- Automation lines - precise actuator logic control
Equivalent & Cross-Brand
Comparing brands before ordering? The full Rexroth 4WE6 equivalent table maps every spool function (E, G, H, J, L, M, U, F) against the Rexroth, Yuken and Vickers codes it replaces. For the swap procedure itself, see the Rexroth 4WE6 replacement guide.
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WE6 series models
Also in Rexroth-style directional valves