Home Full Catalog 4WEH16D50/CG24N9Z5LE
4WEH16D50/CG24N9Z5LE - Electro-Hydraulic Valve by YXCHK
4WEH16 Series

4WEH16D50/CG24N9Z5LE

Electro-Hydraulic Valve model 4WEH16D50/CG24N9Z5LE - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG16 / Cetop 7 / ISO 4401-07
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V, AC 220V
Solenoid TypePilot-operated, internal/external pilot & drain options
Spool FunctionsD — not published in our spool table — drawing on request
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionD
De-energised Flow Pathnot published in our spool table — drawing on request
Yuken Equivalentequivalent code on request

Spool code D is not covered by the published spool table on this site, so no port-connection pattern is restated here from a neighbouring code; the drawing for this exact code is sent with the quotation. Structurally the valve is the standard 4WEH16 body. This entry covers the single-letter D spool.

Cross Reference

Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.

YXCHK Model4WEH16D50/CG24N9Z5LE
ReplacesRexroth 4WEH16
Mounting StandardNG16 / Cetop 7 / ISO 4401-07
Voltage OptionsDC 24V, AC 220V

Pilot & Spool Control

Model 4WEH16D50/CG24N9Z5LE is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — D — rather than the whole series. the port-connection pattern for spool code D is not published in the spool table on this site. No pattern is copied across from a neighbouring code to fill the gap. The trailing E in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.

Mounting & Electrical

4WEH16D50/CG24N9Z5LE mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.

Quality & Reliability

Quality control at the Taizhou factory is 100% end-of-line: electrical operation, internal leakage and a 31.5 MPa pressure test, with the record archived per batch for traceability. The valve body is cast iron, CNC-machined to ISO 4401 mounting-face tolerances. Every model is Intertek certified and covered by a one-year replacement warranty against an eight-year design life, and orders of one piece or more are dispatched from Ningbo Port within seven working days.

Where It Fits

Duty is heavy and continuous - deck winches and anchor gear, crusher circuits, metallurgical line actuators, large press installations. Because a small pilot stage shifts the main NG16 spool, a low-power solenoid signal is enough to switch flows of 300 L/min and above. Quote the existing code and the cross-reference comes back within 24 hours, at no charge.

Typical Applications

  • Marine & offshore - anchor winches and deck machinery
  • Mining equipment - roof supports and crushers
  • Metallurgy - steel production line drives

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models