Home Full Catalog 4WEH16D50/CG24N9Z5LET
4WEH16D50/CG24N9Z5LET - Electro-Hydraulic Valve by YXCHK
4WEH16 Series

4WEH16D50/CG24N9Z5LET

Electro-Hydraulic Valve model 4WEH16D50/CG24N9Z5LET - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG16 / Cetop 7 / ISO 4401-07
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V, AC 220V
Solenoid TypePilot-operated, internal/external pilot & drain options
Spool FunctionsD — not published in our spool table — drawing on request
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionD
De-energised Flow Pathnot published in our spool table — drawing on request
Yuken Equivalentequivalent code on request

The centre condition of spool code D has no published entry in our spool table, and we do not copy a pattern across from a similar single-letter code to fill the gap - ask for the drawing and it accompanies the quotation. The hardware underneath is the ordinary 4WEH16 body. What this page covers is the single-letter D spool.

Cross Reference

Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.

YXCHK Model4WEH16D50/CG24N9Z5LET
ReplacesRexroth 4WEH16
Mounting StandardNG16 / Cetop 7 / ISO 4401-07
Voltage OptionsDC 24V, AC 220V

Pilot & Spool Control

Model 4WEH16D50/CG24N9Z5LET is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — D — rather than the whole series. the port-connection pattern for spool code D is not published in the spool table on this site. No pattern is copied across from a neighbouring code to fill the gap. The trailing ET in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.

Mounting & Electrical

4WEH16D50/CG24N9Z5LET mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.

Quality & Reliability

Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.

Where It Fits

This valve is built for massive industrial power systems: marine deck machinery such as winches and anchors, mining crushers, metallurgical lines and large press installations where the solenoid alone cannot shift the main stage. The high-strength cast-iron housing and hardened spool take continuous heavy-duty cycling. Send the original 4WEH16 code and our engineers return a cross-reference confirmation inside 24 hours, free of charge.

Typical Applications

  • Marine & offshore - anchor winches and deck machinery
  • Mining equipment - roof supports and crushers
  • Metallurgy - steel production line drives

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models