Home Full Catalog DSHG-06-3C2-DL-T-D24
DSHG-06-3C2-DL-T-D24 - Electro-Hydraulic Valve by YXCHK
DSHG-06 Series

DSHG-06-3C2-DL-T-D24

Electro-Hydraulic Valve model DSHG-06-3C2-DL-T-D24 - a Yuken DSHG-06 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 650 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.

Max Pressure 21 MPa
Max Flow 650 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal Size06 Size (NG20)
Max Working Pressure21 MPa
Max T-Port Pressure21 MPa
Max Flow Rate650 L/min
Coil / ActuationDC 24V (D24), AC 220V (A220)
Solenoid TypeDSG-01 class pilot valve
Spool Functions3C2 — all ports blocked (P, A, B and T mutually isolated)
Hydraulic FluidMineral oil per ISO 6743/4

Centre Condition & Cross-Reference

Yuken Spool Code3C2
Equivalent Spool FunctionE
De-energised Flow Pathall ports blocked (P, A, B and T mutually isolated)

With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain, so a cylinder or motor connected to A and B stays locked while the pressure line is sealed inside the valve. This is the blocking centre: the load is held after the pump stops and nothing drifts while the valve sits centred.

Cross Reference

Direct replacement for Yuken DSHG-06 series. 3C60 function corresponds to Rexroth G function (P-T connected).

YXCHK ModelDSHG-06-3C2-DL-T-D24
ReplacesYuken DSHG-06
Mounting Standard06 Size (NG20)
Voltage OptionsDC 24V (D24), AC 220V (A220)

Pilot & Spool Control

Model DSHG-06-3C2-DL-T-D24 is a pilot-operated, solenoid-controlled directional valve of the DSHG-06 series, size 06 with a nominal bore of NG20, built to interchange with the Yuken DSHG-06 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C2 — rather than the whole series. Yuken uses 3C2 for spool function E, so the centre condition is fixed. With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain back to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 650 L/min at 21 MPa.

Mounting & Electrical

DSHG-06-3C2-DL-T-D24 mounts on the ISO 4401 size 06 (NG20) interface, bolt pattern unchanged. The D24 coil is the 24 V DC version: steady current through the stroke keeps pilot force constant whether the spool is at rest or fully shifted. Pilot stage is a DSG-01 class valve; 21 MPa working pressure, 21 MPa T-port limit, 650 L/min rated flow, mineral oil to ISO 6743.

Quality & Reliability

Quality control at the Taizhou factory is 100% end-of-line: electrical operation, internal leakage and a 31.5 MPa pressure test, with the record archived per batch for traceability. The valve body is cast iron, CNC-machined to ISO 4401 mounting-face tolerances. Every model is Intertek certified and covered by a one-year replacement warranty against an eight-year design life, and orders of one piece or more are dispatched from Ningbo Port within seven working days.

Where It Fits

These valves drive the main directional logic on hydraulic presses, injection moulding machines and machine-tool hydraulic units, where a small pilot signal has to switch a large flow. The DSG-01 pilot stage keeps the electrical demand low while the main spool carries the full 21 MPa working pressure. Send the original Yuken code and our engineers confirm the cross-reference inside 24 hours, free of charge.

Typical Applications

  • Cane sugar mills - large flow source switching
  • Ship cranes - heavy lifting control
  • Pulp & paper - heavy-duty hydraulic cylinders

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models