DSHG-06-3C2-T
Electro-Hydraulic Valve model DSHG-06-3C2-T - a Yuken DSHG-06 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 650 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | 06 Size (NG20) |
| Max Working Pressure | 21 MPa |
| Max T-Port Pressure | 21 MPa |
| Max Flow Rate | 650 L/min |
| Coil / Actuation | DC 24V (D24), AC 220V (A220) |
| Solenoid Type | DSG-01 class pilot valve |
| Spool Functions | 3C2 — all ports blocked (P, A, B and T mutually isolated) |
| Hydraulic Fluid | Mineral oil per ISO 6743/4 |
Centre Condition & Cross-Reference
| Yuken Spool Code | 3C2 |
| Equivalent Spool Function | E |
| De-energised Flow Path | all ports blocked (P, A, B and T mutually isolated) |
With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain, so a cylinder or motor connected to A and B stays locked while the pressure line is sealed inside the valve. This is the blocking centre: the load is held after the pump stops and nothing drifts while the valve sits centred.
Cross Reference
Direct replacement for Yuken DSHG-06 series. 3C60 function corresponds to Rexroth G function (P-T connected).
| YXCHK Model | DSHG-06-3C2-T |
| Replaces | Yuken DSHG-06 |
| Mounting Standard | 06 Size (NG20) |
| Voltage Options | DC 24V (D24), AC 220V (A220) |
Pilot & Spool Control
Model DSHG-06-3C2-T is a pilot-operated, solenoid-controlled directional valve of the DSHG-06 series, size 06 with a nominal bore of NG20, built to interchange with the Yuken DSHG-06 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C2 — rather than the whole series. Yuken uses 3C2 for spool function E, so the centre condition is fixed. With both solenoids de-energised, P, A, B and T are mutually isolated. Pressure cannot reach either work port and neither work port can drain back to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 650 L/min at 21 MPa.
Mounting & Electrical
DSHG-06-3C2-T bolts to the ISO 4401 size 06 (NG20) interface with the original port layout, no manifold rework required. Both coil options are catalogued - D24 for 24 V DC and A220 for 220 V AC - and the pilot stage is a DSG-01 class valve. Working pressure is 21 MPa with a 21 MPa T-port limit, rated flow 650 L/min, fluid mineral oil to ISO 6743.
Quality & Reliability
Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.
Where It Fits
The valve sits in the main flow path of heavy machinery - press rams, mould clamps, machine-tool actuator logic - where flow is measured in hundreds of litres per minute and the spool has to shift on a low-power signal. Working pressure is 21 MPa with the same limit on the T port. The cross-reference is confirmed within 24 hours from the original model code, at no charge.
Typical Applications
- Cane sugar mills - large flow source switching
- Ship cranes - heavy lifting control
- Pulp & paper - heavy-duty hydraulic cylinders
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More DSHG-06 series models
Also in Yuken DSHG directional valves