Home Full Catalog DSHG-06-3C4-T
DSHG-06-3C4-T - Electro-Hydraulic Valve by YXCHK
DSHG-06 Series

DSHG-06-3C4-T

Electro-Hydraulic Valve model DSHG-06-3C4-T - a Yuken DSHG-06 compatible hydraulic valve from YXCHK. Rated 21 MPa max pressure and 650 L/min max flow with DC 24V (D24), AC 220V (A220). 100% factory tested, 1-year warranty.

Max Pressure 21 MPa
Max Flow 650 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal Size06 Size (NG20)
Max Working Pressure21 MPa
Max T-Port Pressure21 MPa
Max Flow Rate650 L/min
Coil / ActuationDC 24V (D24), AC 220V (A220)
Solenoid TypeDSG-01 class pilot valve
Spool Functions3C4 — P blocked, A and B open to T
Hydraulic FluidMineral oil per ISO 6743/4

Centre Condition & Cross-Reference

Yuken Spool Code3C4
Equivalent Spool FunctionJ
De-energised Flow PathP blocked, A and B open to T

P is blocked while A and B are both connected to T. The pump is isolated from the circuit and both work lines drain to tank, so the actuator is driven in neither direction and a suspended load can settle. This is the float centre: pressure line sealed, both work ports vented.

Cross Reference

Direct replacement for Yuken DSHG-06 series. 3C60 function corresponds to Rexroth G function (P-T connected).

YXCHK ModelDSHG-06-3C4-T
ReplacesYuken DSHG-06
Mounting Standard06 Size (NG20)
Voltage OptionsDC 24V (D24), AC 220V (A220)

Pilot & Spool Control

Model DSHG-06-3C4-T is a pilot-operated, solenoid-controlled directional valve of the DSHG-06 series, size 06 with a nominal bore of NG20, built to interchange with the Yuken DSHG-06 range. It is one of 205 catalogued YXCHK models, and this page documents a single spool code — 3C4 — rather than the whole series. Yuken uses 3C4 for spool function J, so the centre condition is fixed. P is blocked while A and B are both open to T. The pump is isolated from the circuit and both work lines drain to tank. The first stage is a DSG-01 class pilot valve, so the main spool is shifted by low-power solenoid force while the body passes up to 650 L/min at 21 MPa.

Mounting & Electrical

DSHG-06-3C4-T bolts to the ISO 4401 size 06 (NG20) interface with the original port layout, no manifold rework required. Both coil options are catalogued - D24 for 24 V DC and A220 for 220 V AC - and the pilot stage is a DSG-01 class valve. Working pressure is 21 MPa with a 21 MPa T-port limit, rated flow 650 L/min, fluid mineral oil to ISO 6743.

Quality & Reliability

Each unit is run on the test bench in Taizhou before it is packed: the coil is energised, internal leakage is measured and the assembly is held at 31.5 MPa, and the sheet from that run stays attached to the batch record, so the history of any serial number survives. Valve bodies are cast iron, finished on CNC centres to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life cover the range, orders are despatched from Ningbo Port within seven working days, and a single piece is a valid order quantity.

Where It Fits

The valve sits in the main flow path of heavy machinery - press rams, mould clamps, machine-tool actuator logic - where flow is measured in hundreds of litres per minute and the spool has to shift on a low-power signal. Working pressure is 21 MPa with the same limit on the T port. The cross-reference is confirmed within 24 hours from the original model code, at no charge.

Typical Applications

  • Cane sugar mills - large flow source switching
  • Ship cranes - heavy lifting control
  • Pulp & paper - heavy-duty hydraulic cylinders

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models