4WEH16G50/CG24N9Z5LE
Electro-Hydraulic Valve model 4WEH16G50/CG24N9Z5LE - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG16 / Cetop 7 / ISO 4401-07 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V, AC 220V |
| Solenoid Type | Pilot-operated, internal/external pilot & drain options |
| Spool Functions | G — P → T open, A and B blocked |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | G |
| De-energised Flow Path | P → T open, A and B blocked |
| Yuken Equivalent | 3C60 |
De-energised, P is connected to T while A and B are blocked. Pump flow passes straight back to the tank through the centre, so the power unit is unloaded whenever the valve sits in its rest position, and both work lines stay sealed so the actuator holds where it was left. That combination - pump unloaded, load held - is what the tandem centre is chosen for.
Cross Reference
Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.
| YXCHK Model | 4WEH16G50/CG24N9Z5LE |
| Replaces | Rexroth 4WEH16 |
| Mounting Standard | NG16 / Cetop 7 / ISO 4401-07 |
| Voltage Options | DC 24V, AC 220V |
Pilot & Spool Control
Model 4WEH16G50/CG24N9Z5LE is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — G — rather than the whole series. P is connected to T while A and B are blocked. Pump flow returns to the tank through the centre while both work lines stay sealed. The trailing E in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.
Mounting & Electrical
4WEH16G50/CG24N9Z5LE mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.
Quality & Reliability
Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.
Where It Fits
This valve is built for massive industrial power systems: marine deck machinery such as winches and anchors, mining crushers, metallurgical lines and large press installations where the solenoid alone cannot shift the main stage. The high-strength cast-iron housing and hardened spool take continuous heavy-duty cycling. Send the original 4WEH16 code and our engineers return a cross-reference confirmation inside 24 hours, free of charge.
Typical Applications
- Marine & offshore - anchor winches and deck machinery
- Mining equipment - roof supports and crushers
- Metallurgy - steel production line drives
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WEH16 series models
Also in Rexroth-style directional valves