Home Full Catalog 4WEH16J50/AW220N9Z5LET
4WEH16J50/AW220N9Z5LET - Electro-Hydraulic Valve by YXCHK
4WEH16 Series

4WEH16J50/AW220N9Z5LET

Electro-Hydraulic Valve model 4WEH16J50/AW220N9Z5LET - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG16 / Cetop 7 / ISO 4401-07
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V, AC 220V
Solenoid TypePilot-operated, internal/external pilot & drain options
Spool FunctionsJ — P blocked, A and B open to T
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionJ
De-energised Flow PathP blocked, A and B open to T
Yuken Equivalent3C4

P is blocked while A and B are both connected to T. The pump is isolated from the circuit and both work lines drain to tank, so the actuator is driven in neither direction and a suspended load can settle. This is the float centre: pressure line sealed, both work ports vented.

Cross Reference

Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.

YXCHK Model4WEH16J50/AW220N9Z5LET
ReplacesRexroth 4WEH16
Mounting StandardNG16 / Cetop 7 / ISO 4401-07
Voltage OptionsDC 24V, AC 220V

Pilot & Spool Control

Model 4WEH16J50/AW220N9Z5LET is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — J — rather than the whole series. P is blocked while A and B are both open to T. The pump is isolated from the circuit and both work lines drain to tank. The trailing ET in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.

Mounting & Electrical

4WEH16J50/AW220N9Z5LET fits the ISO 4401-07 (NG16) interface, bolt pattern and porting unchanged. The pilot solenoid terminates in a Z5L DIN 43650 connector rated IP65; an AC coil pulls in on a high inrush current and then holds on a much lower one once the pilot armature seats, so that seating stroke has to stay unobstructed or the main stage will not latch. Main-stage pressure is 31.5 MPa, rated flow 300 L/min, maximum T-port pressure 16 MPa, with the cast-iron body ground to ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.

Quality & Reliability

Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.

Where It Fits

This valve is built for massive industrial power systems: marine deck machinery such as winches and anchors, mining crushers, metallurgical lines and large press installations where the solenoid alone cannot shift the main stage. The high-strength cast-iron housing and hardened spool take continuous heavy-duty cycling. Send the original 4WEH16 code and our engineers return a cross-reference confirmation inside 24 hours, free of charge.

Typical Applications

  • Marine & offshore - anchor winches and deck machinery
  • Mining equipment - roof supports and crushers
  • Metallurgy - steel production line drives

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models