4WEH16J50/CG24N9Z5LET
Electro-Hydraulic Valve model 4WEH16J50/CG24N9Z5LET - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG16 / Cetop 7 / ISO 4401-07 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V, AC 220V |
| Solenoid Type | Pilot-operated, internal/external pilot & drain options |
| Spool Functions | J — P blocked, A and B open to T |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | J |
| De-energised Flow Path | P blocked, A and B open to T |
| Yuken Equivalent | 3C4 |
P is blocked while A and B are both connected to T. The pump is isolated from the circuit and both work lines drain to tank, so the actuator is driven in neither direction and a suspended load can settle. This is the float centre: pressure line sealed, both work ports vented.
Cross Reference
Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.
| YXCHK Model | 4WEH16J50/CG24N9Z5LET |
| Replaces | Rexroth 4WEH16 |
| Mounting Standard | NG16 / Cetop 7 / ISO 4401-07 |
| Voltage Options | DC 24V, AC 220V |
Pilot & Spool Control
Model 4WEH16J50/CG24N9Z5LET is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — J — rather than the whole series. P is blocked while A and B are both open to T. The pump is isolated from the circuit and both work lines drain to tank. The trailing ET in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.
Mounting & Electrical
4WEH16J50/CG24N9Z5LET mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.
Quality & Reliability
Every valve leaves the Taizhou plant only after a full bench test - coil function, internal leakage and a pressure hold at 31.5 MPa - and each result is filed against its production batch, so a serial number can still be traced back years later. Bodies are machined from cast iron on CNC centres to ISO 4401 mounting-face tolerances. The range carries Intertek certification, a one-year replacement warranty and an eight-year design life; standard orders ship from Ningbo Port inside seven working days, and the minimum order is a single piece.
Where It Fits
The circuits here are large: winch and anchor drives on deck, crusher rams, metallurgical line actuators, press installations. A pilot stage does the work of moving the main NG16 spool, so the electrical signal stays small while the switched flow runs to 300 L/min and beyond. Give us the model code you are replacing and the cross-reference is confirmed inside 24 hours, at no charge.
Typical Applications
- Marine & offshore - anchor winches and deck machinery
- Mining equipment - roof supports and crushers
- Metallurgy - steel production line drives
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WEH16 series models
Also in Rexroth-style directional valves