4WEH16L50/CG24N9Z5LET
Electro-Hydraulic Valve model 4WEH16L50/CG24N9Z5LET - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.
Technical Datasheet
| Specification Parameter | Technical Value |
|---|---|
| Nominal Size | NG16 / Cetop 7 / ISO 4401-07 |
| Max Working Pressure | 31.5 MPa |
| Max T-Port Pressure | 16 MPa |
| Max Flow Rate | 300 L/min |
| Coil / Actuation | DC 24V, AC 220V |
| Solenoid Type | Pilot-operated, internal/external pilot & drain options |
| Spool Functions | L — A → T open, B and P blocked |
| Hydraulic Fluid | Mineral oil HL/HLP per DIN 51524 |
Centre Condition & Cross-Reference
| Spool Function | L |
| De-energised Flow Path | A → T open, B and P blocked |
| Yuken Equivalent | 3C12 |
A is connected to T while B and P are blocked. One work line drains to tank, the other stays sealed and the pressure line is isolated, so only one side of the actuator is released when the valve centres. The asymmetry is deliberate: one line vents, the opposite line holds.
Cross Reference
Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.
| YXCHK Model | 4WEH16L50/CG24N9Z5LET |
| Replaces | Rexroth 4WEH16 |
| Mounting Standard | NG16 / Cetop 7 / ISO 4401-07 |
| Voltage Options | DC 24V, AC 220V |
Pilot & Spool Control
Model 4WEH16L50/CG24N9Z5LET is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — L — rather than the whole series. A is connected to T while B and P are blocked. One work line drains while the other stays sealed and the pressure line is isolated. The trailing ET in the ordering code sets this valve's pilot and drain configuration. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.
Mounting & Electrical
4WEH16L50/CG24N9Z5LET mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.
Quality & Reliability
Before packing, each unit is energised, checked for internal leakage and pressure-tested to 31.5 MPa on the test bench in Taizhou; the readings stay on file by batch, which is what lets a warranty question be answered with data instead of guesswork. Cast-iron bodies are CNC-machined to a tolerance of +/- ISO 4401 mounting-face tolerances. Intertek certification, a one-year replacement warranty and an eight-year design life apply across the range. Shipments leave Ningbo Port within seven working days, and one piece is enough to place an order.
Where It Fits
Typical service is plant-scale hydraulics: marine winches and anchoring, mining crushers, metallurgical lines, big press installations. The pilot-operated layout lets a compact solenoid control the main stage, and the cast-iron body with a hardened spool is built for continuous heavy cycling. The cross-reference is confirmed within 24 hours from the original model code, free of charge.
Typical Applications
- Marine & offshore - anchor winches and deck machinery
- Mining equipment - roof supports and crushers
- Metallurgy - steel production line drives
Quality & Standards
Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.
Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.
Related Models
More 4WEH16 series models
Also in Rexroth-style directional valves