Home Full Catalog 4WEH16U50/CG24N9Z5L
4WEH16U50/CG24N9Z5L - Electro-Hydraulic Valve by YXCHK
4WEH16 Series

4WEH16U50/CG24N9Z5L

Electro-Hydraulic Valve model 4WEH16U50/CG24N9Z5L - a Rexroth 4WEH16 compatible hydraulic valve from YXCHK. Rated 31.5 MPa max pressure and 300 L/min max flow with DC 24V, AC 220V. 100% factory tested, 1-year warranty.

Max Pressure 31.5 MPa
Max Flow 300 L/min

Technical Datasheet

Specification ParameterTechnical Value
Nominal SizeNG16 / Cetop 7 / ISO 4401-07
Max Working Pressure31.5 MPa
Max T-Port Pressure16 MPa
Max Flow Rate300 L/min
Coil / ActuationDC 24V, AC 220V
Solenoid TypePilot-operated, internal/external pilot & drain options
Spool FunctionsU — B → T open, A and P blocked
Hydraulic FluidMineral oil HL/HLP per DIN 51524

Centre Condition & Cross-Reference

Spool FunctionU
De-energised Flow PathB → T open, A and P blocked
Yuken Equivalent3C10

B is connected to T while A and P are blocked. The B work line is vented to tank, the A line is sealed and the pressure port is isolated, so only one side of the actuator is released at centre and the pump is kept off the circuit.

Cross Reference

Drop-in replacement for Bosch Rexroth 4WEH16 / 4WEH... series with ET/E/T pilot control codes.

YXCHK Model4WEH16U50/CG24N9Z5L
ReplacesRexroth 4WEH16
Mounting StandardNG16 / Cetop 7 / ISO 4401-07
Voltage OptionsDC 24V, AC 220V

Pilot & Spool Control

Model 4WEH16U50/CG24N9Z5L is an electro-hydraulic (pilot-operated) directional valve in the 4WEH16 family, directly interchangeable with the Bosch Rexroth 4WEH16 series on the ISO 4401-07 (Cetop 7, NG16) interface. It is one of 205 catalogued YXCHK models, and this page documents a single spool function — U — rather than the whole series. B is connected to T while A and P are blocked. The B work line is vented, the A line is sealed and the pressure port is isolated. No trailing configuration letter is appended to the code on this page. A small pilot stage drives the main NG16 spool, so flows of 300 L/min and above are switched by low-power solenoid signals, and the internal/external pilot and drain options (E / T / ET) let the control-oil supply match the original configuration code.

Mounting & Electrical

4WEH16U50/CG24N9Z5L mounts to the ISO 4401-07 (NG16) interface with the same bolt pattern and porting as the original, so no manifold changes are required. The pilot solenoid uses a Z5L DIN 43650 connector rated IP65; a DC coil draws a steady current through the whole stroke, so the pilot stage shifts with the same force at rest and at full travel. Main-stage working pressure reaches 31.5 MPa with a 300 L/min rated flow and 16 MPa maximum T-port pressure, and the cast-iron body is machined to a tolerance of +/- ISO 4401 mounting-face tolerances for leak-free sealing under heavy cyclic load.

Quality & Reliability

Quality control at the Taizhou factory is 100% end-of-line: electrical operation, internal leakage and a 31.5 MPa pressure test, with the record archived per batch for traceability. The valve body is cast iron, CNC-machined to ISO 4401 mounting-face tolerances. Every model is Intertek certified and covered by a one-year replacement warranty against an eight-year design life, and orders of one piece or more are dispatched from Ningbo Port within seven working days.

Where It Fits

This valve is built for massive industrial power systems: marine deck machinery such as winches and anchors, mining crushers, metallurgical lines and large press installations where the solenoid alone cannot shift the main stage. The high-strength cast-iron housing and hardened spool take continuous heavy-duty cycling. Send the original 4WEH16 code and our engineers return a cross-reference confirmation inside 24 hours, free of charge.

Typical Applications

  • Marine & offshore - anchor winches and deck machinery
  • Mining equipment - roof supports and crushers
  • Metallurgy - steel production line drives

Quality & Standards

Every YXCHK valve is 100% factory tested (electrical, leakage and max pressure) before shipment. Mounting patterns comply with ISO 4401 / DIN 24340 international standards, and the design follows the ISO 4401 hydraulic valve interface specification, matching the original Bosch Rexroth and Yuken dimensional standards.

Products are Intertek certified for high-pressure reliability, backed by a 1-year replacement warranty and reliable design service life. Standard orders ship from regular stock at Ningbo Port.

Related Models